We could not rely on .ui files when generating the ninja rules
for the generated UI header files. .ui files might be added to the
target sources but never processed by AUTOUIC afterward, since UI
header files are never included in a source code. Instead of adding
dependency rules based on the .ui files, this approach scans
non-generated source files for includes of the UI header files,
as AUTOUIC does. This gives the consistent set of UI header files
at configure time, that could be used to generate byproducts rules
for the AUTOUIC. Also, the path to the generated UI header file depends
not on the .ui file location but on the include line is used in source
files.
Fixes: #16776
Consider the case where the find_package call for QtCore is wrapped in a
function call. Then AutoGen cannot determine the Qt version, because it
only looks at variables and directory properties. The former don't leave
the function scope and the latter are not set by default.
As a fallback, locate the moc executable via its target and call it with
the --version argument to determine the Qt version.
Issue: #22028
Since commit f65f20938c (Autogen: Avoid processing CSharp targets,
2020-11-12, v3.20.0-rc1~301^2) we collect all sources for a target
earlier than previously. Clear the sources cache so that it will be
re-computed later after AUTOGEN processing.
Fixes: #22085
The '<user target>_autogen/timestamp' target supposed to
generate ui header files using the 'uic'. Ninja must have
information about these header files as a result of generating.
The fix collects .ui files of the user target and generates
a list of the ui headers that need to be added to the generating
results of the '<user target>_autogen/timestamp' target.
The case when the .ui files are not specified and collected by
AUTOUIC from the include directives of the project source files
is not covered in this patch.
Fixes: #16776
Extend Qt(4|5)Autogen.RerunMocBasic to check the following situation:
Class MyObject3 is a QObject-derived class without Q_OBJECT macro.
It's declared in myobject3.h that is not included by any file that is
input of AutoMoc (this is why we had to add PlainObject).
If myobject3.h were included by main.cpp, then AutoMoc would already
track this dependency, because main.cpp has a Q_OBJECT macro.
After the initial build(s), the Q_OBJECT macro is added to myobject3.h,
and an incremental build is run. With Qt >= 5.15 and Ninja, the build
fails, because AutoMoc is not run due to the missing dependency to
myobject3.h.
Test that removing / adding a Q_OBJECT macro doesn't break incremental
builds.
This was initially done to test the fix for #21620, but the test passes
without the fix. The reason is that test1.h is included by main.cpp, which
contains a Q_OBJECT macro, meaning that test1.h is in AutoMoc's
dependencies transitively.
In a subsequent patch we want to extend RerunMocBasic to test the
removal and addition of Q_OBJECT macros works when building
incrementally.
For that, properly generated dependencies are necessary. Currently, the
MocBasic test project is configured using try_compile, and that turns
off the generation of depfiles.
Replace the try_compile call with execute_command calls that first
configure and then build the test project.
This test case enables AUTOMOC on the same sources in two separate targets.
This causes the `moc_*.cpp` generation custom commands to be added to multiple
`_autogen` targets, which is not allowed by the Xcode "new build system".
Skip the part of the test that triggers this problem for now.
Issue: #21205
AutoMoc uses the moc-emitted dependency file of Qt 5.15 to track
dependencies. Such a dependency may well live outside the project and
can vanish, for example when installing a new compiler version.
This situation was detected before, but merely a warning was issued.
Now, we're considering a generated file as out of date if a dependency
is missing and re-generate it.
We also have to remove the missing dependency from the ParseCache.
Otherwise the AUTOMOC target for all generators other than Ninja will
always be out of date.
The ParseCacheChanged flag had to be made atomic, because we're
potentially accessing it from multiple threads. The dependencies vector
itself is not vulnerable in this regard, because there's one vector per
file, and we're accessing exactly one ParseCacheT::FileHandleT per thread.
Fixes: #21136
For Qt >= 5.15.0 and Ninja generators AutoMoc creates a depfile to let
Ninja decide when to run AutoMoc. This was introduced by commit aebfbcaa46
(AutoGen: Use depfiles for the XXX_autogen ninja targets, 2020-01-14,
v3.17.0-rc1~58^2).
However, AutoMoc was not triggered after adding a new moc-able file to
the project. This patch adds the project file (and potentially included
files) to the dependencies in the depfile.
Now, a re-run of AutoMoc is triggered if the project file changes.
Fixes: #21127
Change the default value of `CMAKE_AUTOMOC_PATH_PREFIX` to `OFF` to
restore compatibility with behavior of CMake 3.15 and below.
C++ source files that are generated by Qt's meta object compiler (moc)
include the header file that was passed as input argument to moc. This
is usually a path relative to the source directory, for example
#include "../../source/dir/myobject.h"
That is problematic for reproducible builds as described in #18815.
To cope with that, the target property AUTOMOC_PATH_PREFIX was
introduced in CMake 3.16 by commit d018d27c10 (Autogen: Add moc path
prefix generation (AUTOMOC_PATH_PREFIX), 2019-09-13, v3.16.0-rc1~94^2~4).
The property is default-initialized from the variable
`CMAKE_AUTOMOC_PATH_PREFIX`, which defaults to `ON`.
If this property is ON, and myobject.h is located in an include
directory of the target, moc-generated C++ files include the file
without the "path prefix":
#include "myobject.h"
This behavior, however, can break projects that have equally named
header files in different include directories. As "not breaking
existing projects" trumps "have reproducible builds by default" we
change the default of `CMAKE_AUTOMOC_PATH_PREFIX` to `OFF`.
Also, it is now possible to pass `-DCMAKE_AUTOMOC_PATH_PREFIX=ON` on the
CMake command line. Before, it was overridden in `CMakeGenericSystem`.
Fixes: #20598
Issue: #18815
GitLab now uses a `/-/` component between the `group/project` part of
the URL and the `{issues,merge_requests,tree}` part so that it can
support `group/subgroup/project` with arbitrary depth.
In Qt version 5.15.0 moc learned to output the dependencies
of the generated file.
This commit enhances JobCompileMocT to read the dependency file
written by moc. The dependencies are stored in the same cache that's
used for the dependencies determined by dependency filters.
The dependency filter functionality is turned off if moc's dependency
output feature is used.
Fixes: #17750Fixes: #19058
In commit 7fa7f55230, the Autogen/SameName test
was changed to not test .hh header file processing in AUTOGEN anymore,
because we had to revert that feature. Since we now support .hh header file
processing in AUTOMOC again, we can restore the Autogen/SameName test for
that.
Since commit 4a9154537c (Autogen: Use cmake::IsHeader/SourceExtension
for file type detection, 2019-07-02, v3.16.0-rc1~470^2~4) we process
`.hh` files with `AUTOMOC`. However, this change can break existing
projects that do not expect the behavior. Revert it for now. It can
be restored later via a policy.
Fixes: #20101
The QtAutogen/ManySources test generates a number of source, header, .ui and
.qrc files that get AUTOMOC, AUTOUIC and AUTORCC processed. This stresses the
concurrency framework in `cmQtAutoMocUic` and should reveal any issues
with that.
Build the GAT project with the same generator as the rest of the test.
This was accidentally left out of commit 8c8731b422 (Autogen: Add test
for CMAKE_GLOBAL_AUTOGEN/RCC_TARGET, 2018-11-11, v3.14.0-rc1~396^2~2).
This refactors and simplifies the QtAutogen.RerunRccDepends test.
Repetitive task are packed into macros.
By using version strings to store file timestamps, timestamp comparison
becomes more reliable. Test status and error messages are improved.
This refactors and simplifies the QtAutogen.RerunRccConfigChange test.
Repetitive task are packed into macros.
Test status and error messages are improved.
This refactors and simplifies the QtAutogen.RerunMocBasic test.
Repetitive task are packed into macros.
By using version strings to store file timestamps, timestamp comparison
becomes more reliable. Test status and error messages are improved.
This refactors and simplifies the QtAutogen.RerunMocPlugin test.
Repetitive task are packed into macros.
By using version strings to store file timestamps, timestamp comparison
becomes more reliable. Test status and error messages are improved.
Since commit 5990ecb741 (Compute implicit include directories from
compiler output, 2018-12-07) we now have compiler implicit include
directory computation for gcc and clang. It should be safe now to pass
these to `moc`. This patch re-enables passing the compiler implicit
include directories to `moc`, which was disabled due to issue #18669.
Fixes: #18041
Issue: #18669
Passing an incomplete list of compiler include directories causes
a regression in the KIO project (and probably others). We need to
disable it until the complete list is available (see #16291).
Fixes: #18669
Issue: #18041
Some AUTOGEN tests require the Qt core libraries only and
some require the Qt gui libraries to function.
This replaces the AutogenTest.cmake script with two specific
AutogenCoreTest.cmake and AutogenGuiTest.cmake scripts that
are included on demand.
The tests for AUTOGEN_TARGET_DEPENDS were part of the
AutogenOriginDependsOn tests suite. This separates them
into an own AutogenTargetDepends tests suite.
