Since commit e3895f4a8b (Linking: Preserve nested LINKER: prefixes as
written, 2024-09-17, v3.31.0-rc1~60^2) we may increment an iterator past
the end. Revise logic to avoid that.
Fixes: #26499
When `ui_` include directives have different paths than `CMakeLists.txt`,
the dependency graph is not generated correctly. This is the root cause
of #16776. However, when #26135 was fixed by commit 5363bebc1e (Autogen:
Fix compilation of unchanged source files, 2024-07-16, v3.31.0-rc1~328^2),
it made #16776 worse: the build is always dirty. Revert the fix for now.
Fixes: #26485
Issue: #26135
Issue: #25436
In commit 5363bebc1e (Autogen: Fix compilation of unchanged source files,
2024-07-16, v3.31.0-rc1~328^2) we relied on Ninja Multi-Config dependency graph
optimizations from commit 7c39dabdbc (Autogen: AUTO*_EXECUTABLE: add support
for per-config values, 2023-10-18, v3.29.0-rc1~105^2~1). However, those graph
optimizations are conditional on versions of Qt that enable
[`AUTOGEN_BETTER_GRAPH_MULTI_CONFIG`](https://codereview.qt-project.org/c/qt/qtbase/+/513648).
`UseBetterGraph` should be checked to add ui files to `timestampByproducts`.
Fixes: #26475
There is an inadvertent inconsistency in the notice for the CPS export
experimental feature as compared to other experimental feature notices.
Change it to be consistent.
Since commit 84db8506ff (Deprecate compatibility with CMake versions older
than 3.10, 2024-10-03, v3.31.0-rc1~23^2) the `cmake_minimum_required` and
`cmake_policy` commands warn if the project does not enable policies as
of 3.10 or higher. Clarify the advice given in the warning message about
how to update the version specification, particularly without actually
requiring a newer minimum version of CMake.
There's no need to check if flushing is needed after every command
is added to the variable holding the script content. It is enough to only
check once per test name. This simplifies the flushing logic, removing
the need for a separate flush_script() command. Previously, we were
not clearing the flushed script contents in all cases, but this is now
rigorously enforced at the one location where flushing is performed.
Also simplify the flushing of the list of test names, since that too doesn't
need a separate command. It is simpler and safer to handle that
directly inline where the one call to flush_tests_buffer() was
previously being made.
Fixes: #26431
When a single-value keyword is repeated, and the first instance is
missing a value, it prevents the value from the second instance from
being stored in a variable. This was a regression introduced by
commit ceeea4e511 (cmake_parse_arguments: Set variable if empty string
given after keyword, 2024-08-18). That change also didn't create a
variable if the keyword was given but without a value. The purpose
of the change was to always define a variable if a keyword was given.
Lastly, that change didn't protect the CMP0174 logic to make it only
apply to the PARSE_ARGV form.
The first two of the above problems are fixed here by tracking the
keywords given instead of checking which keywords were missing
values. The third problem is also fixed here, being tightly coupled
to the same logic as the first two problems.
Fixes: #26397
Since commit 7abd3137b7 (Linking: Optionally reorder direct dependencies
from LINK_LIBRARIES, 2024-09-19, v3.31.0-rc1~53^2) the strategy name
`PRESERVE_ORDER` has led users to expect that it strictly preserves
order. While the part of the link line generation logic controlled by
`LINK_LIBRARIES_STRATEGY` does preserve order, it is not the last step.
Toolchain-specific de-duplication can cause the order to change on the
actual link line generated in the build system.
Rename the strategies:
* `PRESERVE_ORDER` => `REORDER_MINIMALLY`
* `REORDER` => `REORDER_FREELY`
The new names make it clear that reordering is always possible, just to
varying degrees. Update the `LINK_LIBRARIES_STRATEGY` documentation to
clarify that the strategies do not directly control the final link line.
Fixes: #26400
Issue: #26271
When using the WindowsKernelModeDriver, do not add the new paths
if the variable was not previously defined. Instead, append them
to the existing value.
Add a new GUID for the Experimental mode gate
Fix a small bug in cmExportPackageInfoGenerator that caused extended
version properties ("compat_version", "version_schema")) to be emitted
when empty. Add a test to ensure this is working as intended.
Fixes: #26264
Revert commit 502610733f (Ensure imported targets in sibling dirs are
deduplicated, 2024-09-15, v3.31.0-rc1~92^2). Also revert the change
from a copy of the logic made by commit cd418d4bb6 (Static libraries
de-duplication: keep first occurrence, 2024-09-29, v3.31.0-rc1~30^2).
The logic was de-duplicating based on the target name rather than based
on the library file path.
Fixes: #26371
Issue: #26284
Re-introduce the behavior originally introduced in CMake 3.30.3 by
commit c1ece78d11 (project: non cache <project> prefix variables are
also created, 2024-08-27, v3.30.3~2^2), but this time with a policy for
compatibility.
Issue: #25714
Issue: #26243
The change in commit 86ad7cc886 (project: Only define non-cache vars if
already defined, 2024-09-15, v3.30.4~2^2) was meant to only check for
non-cache variables when deciding whether to set non-cache project
variables for the current call. However, it erroneously checked for any
variable, including cache variables. This gives the intended result on
the first run, but on subsequent runs a cache variable will exist that
did not on the first run, leading to different behavior between the two
runs. Fix the logic to only check for a pre-existing non-cache
variable, as was originally intended.
Fixes: #26355
Issue a deprecation warning on calls to `cmake_minimum_required` or
`cmake_policy` that set policies based on versions older than 3.10.
Note that the effective policy version includes `...<max>` treatment.
Update the check from commit 3a4791548d (Deprecate compatibility with
CMake versions older than 3.5, 2023-02-09, v3.27.0-rc1~508^2).
This will now preserve empty values in the TEST_LAUNCHER and
CROSSCOMPILING_EMULATOR target properties for tests added by:
- The add_test() command.
- The ExternalData_Add_Test() command from the ExternalData module.
- The gtest_add_tests() or gtest_discover_tests() commands from the
GoogleTest module.
For the gtest_add_tests() and gtest_discover_tests() commands,
empty elements in the values passed after the EXTRA_ARGS keyword
are also now preserved.
Policy CMP0178 is added to provide backward compatibility with the
old behavior where empty values were silently discarded from the
above cases.
Fixes: #26337
Visual Studio Generator: The `VS_TOOL_OVERRIDE` source file property
would previously only be respected for file types that CMake didn't know
how to build out of the box. This change allows the user to override how
any source file is built with a custom build tool, even ones with
standard/recognized extensions such as `.cxx`, `.idl`, etc.
Fixes: #26336
7abd3137b7 Linking: Optionally reorder direct dependencies from LINK_LIBRARIES
9285a9dc9a cmComputeLinkDepends: Add final dependency ordering to debug output
f792db4ca2 cmComputeLinkDepends: Add undocumented per-target debug property
80b469a51d cmComputeLinkDepends: Factor out string literals as named constants
3bd73fcc76 cmComputeLinkDepends: Modernize member initialization
8db69c767b cmComputeLinkDepends: Remove redundant member
dccdd030cd cmComputeLinkDepends: Replace depender index sentinel value with cm::optional
6c9d8dc243 cmComputeLinkDepends: Replace group index sentinel value with cm::optional
...
Acked-by: Kitware Robot <kwrobot@kitware.com>
Tested-by: buildbot <buildbot@kitware.com>
Merge-request: !9835
e3895f4a8b Linking: Preserve nested LINKER: prefixes as written
4185dfbe1b Tests/LINK_OPTIONS: extract common code in test (NFC)
54381b5a81 Linking: extract wrapping linker options to a lambda (NFC)
Acked-by: Kitware Robot <kwrobot@kitware.com>
Acked-by: buildbot <buildbot@kitware.com>
Merge-request: !9823
Traditionally CMake generates link lines by starting with the direct
link dependencies specified by `LINK_LIBRARIES` in their original order
and then appending indirect dependencies that the direct dependencies
do not express. This gives projects control over ordering among
independent entries, which can be important when intermixing flags
and libraries, or when multiple libraries provide the same symbol.
However, it may also result in inefficient link lines.
Add support for an alternative strategy that can reorder direct link
dependencies to produce more efficient link lines. This is useful
for projects that cannot easily specify their targets' direct
dependencies in an order that satisfies indirect dependencies.
Add a `CMAKE_LINK_LIBRARIES_STRATEGY` variable and corresponding
`LINK_LIBRARIES_STRATEGY` target property to select a strategy.
Fixes: #26271
4e62bc943c ctest: Verify TLS server certificate by default
8e92ee34f6 file(DOWNLOAD/UPLOAD): Verify TLS server certificate by default
dcaea54898 cmCTestCurl: Clarify names and logic using optional<bool>
03d37ae3ff cmFileCommand: Clarify names and logic using optional<bool>
Acked-by: Kitware Robot <kwrobot@kitware.com>
Merge-request: !9843
If the connection fails in a way that might be a certificate error, and
verification was enabled by the new default, mention environment
variable `CMAKE_TLS_VERIFY` in the diagnostic to help users that were
relying on the old behavior turn off server certificate verification in
their environment.
Fixes: #23608
3b4d0df670 NVCC: Detect host compiler id and version
38cacd83a5 Tests: Migrate compiler id tests to RunCMake infrastructure
37173f1ccc Tests/RunCMake: Generalize construction of arguments for languages to test
Acked-by: Kitware Robot <kwrobot@kitware.com>
Tested-by: buildbot <buildbot@kitware.com>
Merge-request: !9841
Previously LINKER:,-Xlinker and -Wl, options nested inside LINKER:
prefixes would be transformed to separate prefixed options.
This is confusing and undocumented behavior, instead preserve these
as written.
Fixes: #26298
