The old behavior of $<IN_LIST:...> is inconsistent with that of
if(IN_LIST), in that it does not find an empty search item even if
the list contains empty items. This change adds a new policy to
correctly handle empty items and make the behavior more consistent
with if(IN_LIST).
Fixes: #18556
Removing FindQt.cmake gives Qt upstream a path forward to export its
own QtConfig.cmake files which can be found by find_package()
without having to explicitly specify CONFIG. Projects that still
want to use Qt3/4 can call find_package(Qt[34]), include(FindQt),
or add FindQt.cmake to their CMAKE_MODULE_PATH.
* The code snippets in the docs consist of CMake code mixed
with syntax definition punctuation like < > [ ] ... Therefore
a pure CMake lexer is inadequate. Here it is replaced by a
CMake syntax definition parser.
* Fixed syntax definition snippets in FindPkgConfig.cmake to
make best use of syntax highlighting. This source file is the
hardest to support because it contains comparison operators
<= = >=, which need special attention to avoid confusion
with the placeholder indicators <...>.
* Fixed syntax in execute_process.rst (there were unbalanced
brackets).
* Disabled syntax highlighting for long string examples in
cmake-language.7.rst.
* No highlighting of removed syntax in CMP0049
* To inspect the outcome of this patch, see e.g. the pages
* manual/cmake-buildsystem.7.html
* module/ExternalProject.html
* module/FindPkgConfig.html
which are particularly rich in complex code snippets.
This was overlooked in the initial implementation of CMP0053. However,
an additional policy to reject it again is not worth it. Instead, add
tests and document the behavior.
Fixes: #17883
Before this change, install rules created by add_subdirectory()
would be executed after all of the top-level install rules, even
if they were declared before the top-level rules. This change
adds a new policy, CMP0082, which interleaves the add_subdirectory()
install rules with the other install rules so they are run in the
correct order.
This commit adds a new CMake policy, CMP0080, which prohibits the
inclusion of BundleUtilities at configure time. The old behavior is
to allow the inclusion.
Previously the command did not allow naming targets on the LHS that
were not created in the calling directory. Lift this restriction to
enable more flexible use by projects.
Targets named on the RHS will need to be looked up during generation in
the scope of the call site rather than the scope of the LHS target.
Introduce an internal syntax in `[INTERFACE_]LINK_LIBRARIES` properties
to specify target names that need to be looked up in a directory other
than that containing the target on which the property is set. Add
minimal documentation of the syntax to help users that encounter it.
Unfortunately CMake previously did allow such calls in the case that
only `INTERFACE` libraries are specified, but those libraries would be
looked up in the target's directory rather than the caller's. Add
policy `CMP0079` to enable the new behavior with new lookup scope in a
compatible way.
Fixes: #17943
Add documentation for both the CMake variable and environment variable
of this name pattern. Update references to these names to link to their
documents. Clarify the pattern used to construct their names.
Previously the command considered non-absolute source file paths relative to
the associated target on the LHS. This causes problems in incremental builds
where files are added from subdirectories and forces users to workaround by
manually converting to absolute paths. Change this to enable more intuitive
usage by projects.
Fixes#17981
Other check modules honor this variable, so include file checks should
too. Add policy `CMP0075` to enable the behavior in a compatible way.
This change was originally made by commit v3.11.0-rc1~108^2
(CheckIncludeFiles: Honor CMAKE_REQUIRED_LIBRARIES, 2017-12-24) but it
was reverted by commit v3.11.1~9^2 (Revert "CheckIncludeFiles: Honor
CMAKE_REQUIRED_LIBRARIES", 2018-04-04) because the behavior change could
affect checks in existing projects in an incompatible way.
Fixes: #9514
This feature was originally added by commit v3.9.0-rc1~71^2~2 (find_*:
Add a new PackageRoot search path group, 2017-05-03) and documented by
commit v3.9.0-rc1~71^2 (find_*: Add docs for PackageRoot search path
group, 2017-05-03). However, we had to disable the feature and remove
the documentation in commit v3.9.1~2^2 (find_*: Disable the PACKAGE_ROOT
search path group for CMake 3.9, 2017-08-08) due to breaking projects
that used `PackageName_ROOT` variables themselves.
Add policy `CMP0074` to restore the `PackageName_ROOT` variable behavior
in a compatible way. Also revise the stack of root paths to store the
paths themselves rather than the package names. This way the policy can
be considered at the `find_package` call site instead of individual
`find_` calls inside a find module.
Co-Author: Chuck Atkins <chuck.atkins@kitware.com>
Issue: #17144
Update documentation to account for commit ae5f40696e (CMP0037: Allow
test and package targets when features are not enabled, 2017-10-26).
Issue: #16062
In commit v3.5.0-rc1~8^2~2 (Help: Clarify policy `CMP0040`
documentation, 2016-01-28) the documentation was clarified to indicate
that the target must be defined in the current directory. Do the same
for the text of the policy warning itself.
Fixes: #17399
This lets AUTOMOC and AUTOUIC process GENERATED files which
used to be ignored before.
A new policy CMP0071 ensures that the old behavior of ignoring
GENERATED files is enabled when the CMake compatibility version
CMAKE_MINIMUM_REQUIRED is < 3.10.
Closes#16186
Previously `file(GENERATE)` did not define any behavior for relative
paths given to the `OUTPUT` or `INPUT` arguments. Define behavior
consistent with CMake conventions and add a policy to provide
compatibility for projects that relied on the old accidental behavior.
Fixes: #16786
Previously the `INTERPROCEDURAL_OPTIMIZATION` target property was
honored only for the Intel compiler on Linux and otherwise ignored. In
order to add support for more compilers incrementally without changing
behavior in the future, add a new policy whose NEW behavior enforces the
`INTERPROCEDURAL_OPTIMIZATION` property. Add flags for supported
compilers and otherwise produce an error.
BUILD_WITH_INSTALL_RPATH, SKIP_BUILD_RPATH, CMAKE_SKIP_RPATH and
CMAKE_SKIP_INSTALL_RPATH no longer any effect on the install name
of a target on macOS.
Fixes: #16589
Projects use `try_compile` to check if they will be able to compile some
particular source code. When a language standard variable like
`CMAKE_CXX_STANDARD` is set, then the project intends to compile source
code using a compiler mode for that standard. Therefore it makes sense
for `try_compile` to use that standard in the test project too.
Unfortunately this was not done when support for the
`CMAKE_CXX_STANDARD` variable was first implemented. Add a policy to
introduce the improved behavior in a compatible way.
Closes: #16456
In the `try_compile` source file signature we propagate the caller's
value of `CMAKE_<LANG>_FLAGS` into the test project. Extend this to
propagate `CMAKE_<LANG>_FLAGS_<CONFIG>` too instead of always using the
default value in the test project. This will be useful, for example, to
allow the MSVC runtime library to be changed (e.g. `-MDd` => `-MTd`).
However, some projects may currently depend on this not being done,
so we need to activate the behavior using a policy.
This change was originally made by commit v3.6.0-rc1~160^2 (try_compile:
Honor CMAKE_<LANG>_FLAGS_<CONFIG> changes, 2016-04-11) but without the
policy and so had to be reverted during the 3.6 release candidate cycle.
Fixes#16174.
if(TEST TestNameThatExists) will return true if a test with the name
TestNameThatExists has been added with add_test. The syntax is similar
to if(TARGET TargetName). Since use of "TEST" as an argument to if()
could previously be interpreted as a non-keyword argument, add policy
CMP0064 to treat it as a keyword as NEW behavior.
The most likely documentation page a project author will read in
response to a policy warning is the page for the policy itself.
Add to every policy documentation page a note explicitly stating
that the OLD behavior is deprecated. Also mention this in the
cmake_policy() command documentation that explains how to set a
policy to OLD.
Suggested-by: Fraser Hutchison <fraser.hutchison@gmail.com>
The <LANG>_VISIBILITY_PRESET and VISIBILITY_INLINES_HIDDEN were first
merged in commit v2.8.12~322 (Merge topic 'VISIBILITY_PRESET-property',
2013-06-05) but worked only for shared libraries and executables with
exports. Prior to commit v3.0.0-rc1~581^2 (GenerateExportHeader:
Deprecate add_compiler_export_flags function., 2013-09-02) the
add_compiler_export_flags function was used to add visibility flags to
all targets.
The visibility flags are useful for sources in all target types because
they may be later linked into shared libraries or executables with
exports. Introduce policy CMP0063 to enable them for all target types
while preserving compatibility with existing projects that do not expect
this.
This reverts commit 242c3966 (add_custom_command: Diagnose
MAIN_DEPENDENCY limitation, 2015-03-09) and the follow up commit
b372a99a (UseSWIG: Do not use MAIN_DEPENDENCY on custom commands,
2015-03-26).
I misdiagnosed the underlying issue that prompted creation of policy CMP0057.
The actual issue surfaces when a single custom command's MAIN_DEPENDENCY
is listed in more than one target; this issue will have to be addressed
independently.
The previous example for CMP0054 did not show how critical the policy is
since the result is the same in both cases (NEW and OLD behavior).
Instead show an example when the policy does make a difference.
When CMP0003 was first introduced we wanted to link all libraries by
full path. However, some projects had problems on platforms where
find_library would find /usr/lib/libfoo.so when the project really
wanted to link to /usr/lib/<arch>/libfoo.so and had been working by
accident because pre-CMP0003 behavior used -lfoo to link.
We first tried to address that in commit v2.6.0~440 (Teach find_library
to avoid returning library paths in system directories, 2008-01-23) by
returning just "foo" for libraries in implicit link directories. This
caused problems for projects expecting find_library to always return a
full path. We ended up using the solution in commit v2.6.0~366 (...
switch library paths found in implicit link directories to use -l,
2008-01-31). However, the special case for libraries in implicit link
directories has also proven problematic and confusing.
Introduce policy CMP0060 to switch to linking all libraries by full path
even if they are in implicit link directories. Explain in the policy
documentation the factors that led to the original approach and now to
this approach.
Add policy CMP0059 to cover this change. The property has been
deprecated since CMake 2.4 anyway.
This will help clean up cmMakefile -- the DefineFlagsOrig member should
not need to exist.
Add policy CMP0058 to avoid generating 'phony' ninja rules for unknown
custom command dependencies. This requires projects to specify their
custom command byproducts explicitly. With this requirement we no
longer have to assume that unknown custom command dependencies are
generated and can instead simply assume they are source files expected
to exist when the build starts. This is particularly important in
in-source builds. It is also helpful for out-of-source builds to allow
Ninja to diagnose missing files before running custom command rules that
depend on them.
