archived-netvisor/docs/INSTALLATION.md

Installation Guide

This guide covers installing NetVisor on various platforms and deployment scenarios.

Table of Contents

• Requirements
• Docker Installation (Recommended)
• Building from Source
• Platform-Specific Instructions
• Additional Daemons
• Troubleshooting
• Uninstalling

Requirements

Server Requirements

Docker Installation (Recommended)

• Docker Engine 20.10 or later
• Docker Compose V2

Building from Source

• Rust 1.90 or later
• Node.js 20 or later
• PostgreSQL 17
• 4GB RAM minimum
• 20GB disk space

Daemon Requirements

Integrated Daemon (included in default docker-compose):

• Docker with host networking support
• Runs on same host as server

Additional Daemons (optional, for multi-VLAN scanning):

• Linux: Docker with host networking OR standalone binary
• macOS: Standalone binary only (Docker Desktop lacks host networking)
• Windows: Standalone binary only (Docker Desktop lacks host networking)

Docker Installation (Recommended)

This is the easiest way to get started with NetVisor.

1. Download the Docker Compose File

curl -O https://raw.githubusercontent.com/mayanayza/netvisor/refs/heads/main/docker-compose.yml

2. Review Configuration

The default docker-compose.yml includes:

• NetVisor server on port 60072
• PostgreSQL database
• Integrated daemon for immediate network scanning

Important: The integrated daemon assumes your Docker bridge network is 172.17.0.1. If your Docker bridge uses a different address, edit the NETVISOR_INTEGRATED_DAEMON_URL environment variable in the compose file.

3. Start NetVisor

docker compose up -d

4. Verify Installation

Check that services are running:

docker compose ps

You should see:

• netvisor-server - Running on port 60072
• netvisor-postgres - PostgreSQL database
• netvisor-daemon - Integrated daemon

5. Access the UI

Navigate to http://<your-server-ip>:60072

You'll see the registration page on first load.

Building from Source

Refer to contributing for details on getting your dev environment set up to build from source.

Platform-Specific Instructions

Proxmox LXC Container

You can use this helper script to create a NetVisor LXC on your Proxmox host.

Unraid

NetVisor is available as an Unraid community app.

Common Issues:

If running NetVisor directly on a Proxmox host and encountering could not create any Unix-domain sockets, add this to both the PostgreSQL and NetVisor services in your docker-compose:

security_opt:
  - apparmor:unconfined

If running in an LXC, you may need to change NETVISOR_INTEGRATED_DAEMON_URL to 172.31.0.1.

See issue #87 for more details.

Additional Daemons

To scan multiple VLANs or remote networks, deploy additional daemons.

Creating a Daemon

1. Navigate to Manage > Daemons in the NetVisor UI
2. Click "Create Daemon"
3. Select the target network
4. Select Daemon mode
5. Click "Generate Key" to create an API key
6. Copy either the Docker Compose or binary installation command

Manual Installation:

Download the appropriate binary from the releases page:

• Linux x86_64: netvisor-daemon-linux-amd64
• Linux ARM64: netvisor-daemon-linux-arm64
• macOS x86_64: netvisor-daemon-darwin-amd64
• macOS ARM64: netvisor-daemon-darwin-arm64
• Windows x86_64: netvisor-daemon-windows-amd64.exe

Make it executable (Linux/macOS):

chmod +x netvisor-daemon
sudo mv netvisor-daemon /usr/local/bin/

Run the Daemon:

netvisor-daemon \
  --server-url http://YOUR_SERVER_URL \
  --network-id YOUR_NETWORK_ID \
  --daemon-api-key YOUR_API_KEY
  --mode push

Systemd Service (Linux)

For automatic startup, the install script offers to set up a systemd service.

Manual systemd setup:

1. Download the service file:

curl -o netvisor-daemon.service https://raw.githubusercontent.com/mayanayza/netvisor/main/netvisor-daemon.service

2. Edit the service file with your configuration:

sudo nano netvisor-daemon.service

Update the ExecStart line with your parameters.

3. Install and enable:

sudo mv netvisor-daemon.service /etc/systemd/system/
sudo systemctl daemon-reload
sudo systemctl enable netvisor-daemon
sudo systemctl start netvisor-daemon

4. Check status:

sudo systemctl status netvisor-daemon
sudo journalctl -u netvisor-daemon -f

Troubleshooting

Integrated Daemon Not Initializing

Symptoms: Daemon shows in UI but doesn't start discovery

Diagnosis:

# Check daemon logs
docker logs netvisor-daemon

# Check if daemon can reach server
docker exec netvisor-daemon curl http://netvisor-server:60072/api/health

Solutions:

1. Verify bridge network: Check your Docker bridge IP

   docker network inspect bridge | grep Gateway
   

2. Update compose file: If gateway isn't 172.17.0.1, update NETVISOR_INTEGRATED_DAEMON_URL

3. Check API key: Ensure the integrated daemon has a valid API key in the database

Discovery Fails with "CONCURRENT_SCANS too high"

Symptoms: Daemon crashes or runs out of memory during scans

Solution: Reduce concurrent scans in daemon configuration:

Docker:

environment:
  - NETVISOR_CONCURRENT_SCANS=10  # Reduce from default

Binary:

netvisor-daemon --concurrent-scans 10 ...

See CONFIGURATION.md for recommended values.

Port Already in Use

Symptoms: Server fails to start with "address already in use"

Solution: Change the port mapping in docker-compose.yml:

ports:
  - "8080:60072"  # Change 60072 to any available port

Permission Denied Errors (Linux)

Symptoms: "Permission denied" when accessing Docker socket

Solution: Add user to docker group:

sudo usermod -aG docker $USER
newgrp docker

Log out and back in for changes to take effect.

Uninstalling

Docker Installation

# Stop and remove containers
docker compose down

# Remove volumes (deletes all data)
docker compose down -v

# Remove images
docker rmi mayanayza/netvisor-server:latest
docker rmi mayanayza/netvisor-daemon:latest

Standalone Daemon

Linux/macOS:

# Stop systemd service (if installed)
sudo systemctl stop netvisor-daemon
sudo systemctl disable netvisor-daemon
sudo rm /etc/systemd/system/netvisor-daemon.service

# Remove binary
sudo rm /usr/local/bin/netvisor-daemon

# Remove configuration
rm -rf ~/.config/netvisor/  # Linux
rm -rf ~/Library/Application\ Support/com.netvisor.daemon/  # macOS

Windows:

1. Stop the daemon process
2. Delete the executable
3. Remove configuration from %APPDATA%\netvisor\daemon\

---

Next Steps: See the User Guide to learn how to use NetVisor's features.