diff --git a/docs/de/setup/linux.md b/docs/de/setup/linux.md
index c1616aa4..af078b1a 100644
--- a/docs/de/setup/linux.md
+++ b/docs/de/setup/linux.md
@@ -55,30 +55,32 @@ curl -sSL https://raw.githubusercontent.com/gnmyt/myspeed/development/scripts/un
 
 ## Manuelle Installation
 ```sh
-sudo apt-get install wget curl unzip -y #(1)
+sudo apt-get install wget curl -y #(1)
 
-# Dies ist nur erforderlich, wenn NodeJS noch nicht installiert ist
-curl -sSL https://deb.nodesource.com/setup_18.x | bash
-sudo apt-get install nodejs -y #(2)
+mkdir /opt/myspeed && cd /opt/myspeed #(2)
 
-mkdir /opt/myspeed && cd /opt/myspeed #(3)
+# Architektur erkennen und passende Binary herunterladen
+ARCH=$(uname -m)
+if [ "$ARCH" = "x86_64" ]; then
+  ARCH="x64"
+elif [ "$ARCH" = "aarch64" ]; then
+  ARCH="arm64"
+fi
 
-wget $(curl -s https://api.github.com/repos/gnmyt/myspeed/releases/latest | grep browser_download_url | cut -d '"' -f 4) #(4)
+wget $(curl -s https://api.github.com/repos/gnmyt/myspeed/releases/latest \
+  | grep "browser_download_url.*linux-${ARCH}" | cut -d '"' -f 4) \
+  -O myspeed #(3)
 
-unzip MySpeed-*.zip && rm MySpeed-*.zip #(5)
+chmod +x myspeed #(4)
 
-npm install #(6)
-
-NODE_ENV=production node server #(7)
+./myspeed #(5)
 ```
 
 1. Hier werden alle notwendigen Pakete für die Installation des Projekts installiert.
-2. Dieser Schritt installiert die neueste Version von NodeJS.
-3. Erstelle nun den Ordner, in dem du MySpeed installieren möchtest. In diesem Fall ist es der Ordner `/opt/myspeed`.
-4. Installiere nun die neueste Version von MySpeed.
-5. Entpacke die gerade heruntergeladene Datei (danach kannst du sie löschen).
-6. Installiere nun alle Abhängigkeiten.
-7. Starte nun MySpeed. MySpeed ist jetzt auf Port 5216 verfügbar.
+2. Erstelle nun den Ordner, in dem du MySpeed installieren möchtest. In diesem Fall ist es der Ordner `/opt/myspeed`.
+3. Lade die vorkompilierte Binary für deine Architektur (x64 oder arm64) herunter.
+4. Mache die Binary ausführbar.
+5. Starte nun MySpeed. MySpeed ist jetzt auf Port 5216 verfügbar.
    Wenn du planst, MySpeed im Hintergrund laufen zu lassen, siehe die Anleitung unten.
 
 ## Installation von MySpeed aus dem Quellcode
@@ -87,25 +89,26 @@ Dieser Prozess installiert die neuste Entwicklungsversion von MySpeed. Fehler k
 :::
 
 ```sh
-sudo apt-get install git curl -y #(1)
+sudo apt-get install git curl npm -y #(1)
 
-# Dies ist nur erforderlich, wenn NodeJS noch nicht installiert ist
-curl -sSL https://deb.nodesource.com/setup_18.x | bash
-sudo apt-get install nodejs -y #(2)
+# Deno installieren
+curl -fsSL https://deno.land/install.sh | sh
+export DENO_INSTALL="$HOME/.deno"
+export PATH="$DENO_INSTALL/bin:$PATH" #(2)
 
 mkdir /opt/myspeed && cd /opt/myspeed #(3)
 
 git clone https://github.com/gnmyt/myspeed.git . #(4)
 
-npm install #(5)
+deno install #(5)
 
 cd client && npm install && npm run build && cd .. && mv client/build . #(6)
 
-NODE_ENV=production node server #(7)
+deno run --allow-all server/index.js #(7)
 ```
 
 1. Hier installierst du alle notwendigen Pakete, um das Projekt zu installieren.
-2. Dieser Schritt installiert die neuste Version von NodeJS.
+2. Dieser Schritt installiert die Deno Runtime.
 3. Erstelle nun den Ordner, in welchen du MySpeed installieren möchtest. In diesem Fall ist das der Ordner `/opt/myspeed`.
 4. Klone nun das MySpeed Repository, um Zugriff auf den Code zu erhalten.
 5. Installiere nun alle Abhängigkeiten des Servers.
@@ -134,11 +137,10 @@ Die Installation als Systemdienst ist nicht schwer. In diesem Fall verwenden wir
 
    [Service]
    Type=simple
-   ExecStart=/usr/bin/node server
+   ExecStart=/opt/myspeed/myspeed
    Restart=always
    # \/ Es wird dringend empfohlen, hier deinen eigenen Benutzer zu erstellen
    User=root
-   Environment=NODE_ENV=production
    # \/ Gib hier deinen Installationsort an
    WorkingDirectory=/opt/myspeed 
 
diff --git a/docs/de/setup/windows.md b/docs/de/setup/windows.md
index d9522d09..b2a14ecf 100644
--- a/docs/de/setup/windows.md
+++ b/docs/de/setup/windows.md
@@ -3,60 +3,53 @@ Hier beschreiben wir die Einrichtung für Windows.
 
 ## Installation von MySpeed
 
-1. NodeJS herunterladen  
-   Um MySpeed zu verwenden, benötigst du zuerst **NodeJS**. Du kannst den Installer ganz einfach [hier](https://nodejs.org/en/download/) herunterladen. Empfohlen wird die LTS-Version 18 von NodeJS.
+1. MySpeed herunterladen  
+   Lade die neueste Version von MySpeed von der [Releases-Seite](https://github.com/gnmyt/myspeed/releases/latest) herunter. Lade die Datei `myspeed-windows-x64.exe` herunter.
 
-2. MySpeed herunterladen  
-   Lade jetzt die neueste Version von MySpeed herunter. Die aktuellste Version findest du [hier](https://github.com/gnmyt/myspeed/releases/latest). Lade die Datei "MySpeed-x.x.x-zip" von hier herunter.
+2. Datei platzieren  
+   Verschiebe die heruntergeladene Datei in einen Ordner deiner Wahl (z.B. `C:\MySpeed`). Benenne sie der Einfachheit halber in `myspeed.exe` um.
 
-3. Datei entpacken  
-   Entpacke nun die heruntergeladene Datei an einen Ort deiner Wahl. Am besten an einen Ort, den du später wiederfindest 🌚.
-
-4. Installation testen  
-   Navigiere zuerst in den Ordner, wo du die Datei entpackt hast. Klicke in einen leeren Bereich dieses Ordners mit `Shift` + `Rechtsklick` und wähle "Öffnen in Powershell".  
-   Füge nun diesen Befehl in das Konsolenfenster ein und drücke `Enter`:
-   ```sh
-   npm install
-   ```
-
-   ::: warning Schlägt die NPM-Installation fehl?
-   Möglicherweise gibt es keine vorkompilierten Module für dein System. In diesem Fall musst du die Module selbst kompilieren.
-   Folge diesen Schritten:
-
-   1. Python herunterladen  
-      Um das Projekt zu "bauen", benötigst du auch Python. Du kannst es [hier](https://www.python.org/downloads/) herunterladen.
-
-   2. Visual Studio BuildTools herunterladen  
-      Das Tool "node-gyp" erfordert auch Visual Studio BuildTools, um das Projekt erfolgreich zu "bauen". So funktioniert es:
-      1. Klicke [auf diesen Link](https://visualstudio.microsoft.com/thank-you-downloading-visual-studio/?sku=BuildTools) und warte einen Moment, bis der Download startet.
-      2. Öffne die Datei und klicke auf "Weiter".
-      3. Wähle jetzt die optionale Workload "Desktopentwicklung mit C++" aus und bestätige deine Auswahl durch Klicken auf "Installieren".
-   3. Führe `npm install` erneut aus.
-      :::
-      Wenn alles erfolgreich durchläuft, hast du alles richtig gemacht! Herzlichen Glückwunsch. :)  
-      Du kannst MySpeed jetzt mit diesem Befehl in Powershell starten.
-
-5. MySpeed starten
+3. Installation testen  
+   Öffne PowerShell oder die Eingabeaufforderung im Ordner, in dem du die Datei platziert hast (Shift + Rechtsklick > "PowerShell-Fenster hier öffnen").  
+   Führe die ausführbare Datei aus:
    ```powershell
-   $env:NODE_ENV="production"; node server
+   .\myspeed.exe
    ```
 
+   Wenn alles erfolgreich durchläuft, hast du alles richtig gemacht! Herzlichen Glückwunsch. :)  
+   MySpeed ist jetzt auf Port 5216 verfügbar. Öffne http://localhost:5216 in deinem Browser.
+
 ## Automatischer Start mit dem Autostart-Ordner in Windows
 
 1. Autostart-Ordner in Windows öffnen  
    Drücke gleichzeitig die Tasten (`Windows` + `R`) auf deiner Tastatur, bis ein Ausführen-Dialog erscheint. Gib dann `%USERPROFILE%\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup` ein und drücke `Enter`.
 
-2. Autostart-Datei erstellen  
-   Stelle sicher, dass du [Dateinamenerweiterungen aktiviert](https://support.microsoft.com/en-us/windows/common-file-name-extensions-in-windows-da4a4430-8e76-89c5-59f7-1cdbbc75cb01) hast. Wenn das erledigt ist, erstelle ein neues Dokument mit `Rechtsklick` > `Neu` > `Textdokument`.  
-   Drücke dann `Strg` + `A` und benenne es als "MySpeed.bat". Drücke dann zweimal `Enter`.
+2. Verknüpfung erstellen  
+   Klicke mit der rechten Maustaste in den Ordner und wähle `Neu` > `Verknüpfung`. Navigiere zu deiner `myspeed.exe`-Datei und erstelle die Verknüpfung.
 
-3. Inhalt erstellen  
-   Klicke mit `Rechtsklick` und wähle `Bearbeiten`. Füge dann den folgenden Code ein und passe den Installationsort an:
-   ```batch
-   @echo off
-   cd "C:\Users\Desktop\MySpeed"
-   set NODE_ENV=production
-   node server
+3. Wenn alles funktioniert hat, sollte MySpeed jetzt automatisch starten, wenn das System hochfährt.
+
+## Alternative: Installation aus dem Quellcode
+::: warning Achtung
+Dieser Prozess installiert die neueste Entwicklungsversion von MySpeed. Fehler können auftreten.
+:::
+
+1. Deno herunterladen  
+   Um MySpeed aus dem Quellcode zu bauen, benötigst du **Deno**. Öffne PowerShell und führe aus:
+   ```powershell
+   irm https://deno.land/install.ps1 | iex
    ```
 
-4. Wenn alles funktioniert hat, sollte MySpeed jetzt automatisch starten, wenn das System hochfährt.
+2. MySpeed-Quellcode herunterladen  
+   Klone das Repository oder lade den Quellcode von [GitHub](https://github.com/gnmyt/myspeed) herunter.
+
+3. Abhängigkeiten installieren und bauen
+   ```powershell
+   deno install
+   cd client && npm install && npm run build && cd .. && move client\build build
+   ```
+
+4. MySpeed starten
+   ```powershell
+   deno run --allow-all server/index.js
+   ```
diff --git a/docs/de/troubleshooting.md b/docs/de/troubleshooting.md
index 8fab69ee..66a78831 100644
--- a/docs/de/troubleshooting.md
+++ b/docs/de/troubleshooting.md
@@ -10,22 +10,15 @@ gelöst sein. :)
    Um die Berechtigungen zu setzen, gib den Befehl `chmod 700 /opt/myspeed` ein. (Ersetze /opt/myspeed mit deinem
    Installationsort)
 
-2. Build Essentials Installieren   
-   Es ist aktuell möglich, dass der Fehler auftritt, weil das Paket `build-essential` nicht installiert ist. Installiere
-   es ganz einfach mit dem Befehl `sudo apt-get install build-essential` nach.
-
-3. Führe eine Neuinstallation der Module aus   
-   Gib zuerst den Befehl `rm -R node_modules` im Installationsordner ein, um die Module zu löschen und installiere sie
-   dann mit `npm install` nach.
+2. Führe eine Neuinstallation der Abhängigkeiten aus   
+   Führe `deno cache --reload server/index.js` im Installationsordner aus, um alle Abhängigkeiten neu zu laden.
    :::
 
 ::: danger Diese MySpeed-Instanz befindet sich aktuell im Entwicklungsmodus
-Das ist nicht wirklich ein Fehler, lediglich eine Sicherung um das Tool nur in Produktionsumgebungen verwenden zu
-können. Setze dazu die Umgebungsvariable `NODE_ENV` auf den Wert `production`.
-
-Unter Linux erreichst du das mit `export NODE_ENV=production` und unter Windows in der Powershell
-mit `$env:NODE_ENV="production"`.
-
-Lies dir auch mal den [Guide zur 24/7 Installation](setup/linux) durch, wenn du planst, MySpeed im Hintergrund laufen
-zu lassen und beim Systemstart automatisch hochzufahren.
+Das bedeutet, dass der Client-Build-Ordner nicht gefunden wurde. Wenn du aus dem Quellcode installiert hast, stelle sicher, dass du zuerst den Client baust:
+```sh
+cd client && npm install && npm run build && cd .. && mv client/build .
+```
+Alternativ kannst du ein fertiges Release herunterladen oder Docker verwenden.
+Lies dir auch mal den [Guide zur 24/7 Installation](setup/linux) durch, wenn du planst, MySpeed im Hintergrund laufen zu lassen und beim Systemstart automatisch hochzufahren.
 :::
\ No newline at end of file
diff --git a/docs/en/setup/linux.md b/docs/en/setup/linux.md
index ac89383b..713def1e 100644
--- a/docs/en/setup/linux.md
+++ b/docs/en/setup/linux.md
@@ -4,7 +4,7 @@ Here the setup for Linux is described. MySpeed can be installed in several ways.
 ## Installation with Docker
 
 ::: tip Help
-   You don't know how to install Docker? Then check out [this guide](https://docs.docker.com/engine/install/#server)
+You don't know how to install Docker? Then check out [this guide](https://docs.docker.com/engine/install/#server)
 :::
 
 
@@ -56,30 +56,32 @@ curl -sSL https://raw.githubusercontent.com/gnmyt/myspeed/development/scripts/un
 
 ## Manual installation
 ```sh
-sudo apt-get install wget curl unzip -y #(1)
+sudo apt-get install wget curl -y #(1)
 
-# You only need to do this if you don't have NodeJS installed yet
-curl -sSL https://deb.nodesource.com/setup_18.x | bash
-sudo apt-get install nodejs -y #(2)
+mkdir /opt/myspeed && cd /opt/myspeed #(2)
 
-mkdir /opt/myspeed && cd /opt/myspeed #(3)
+# Detect architecture and download the appropriate binary
+ARCH=$(uname -m)
+if [ "$ARCH" = "x86_64" ]; then
+  ARCH="x64"
+elif [ "$ARCH" = "aarch64" ]; then
+  ARCH="arm64"
+fi
 
-wget $(curl -s https://api.github.com/repos/gnmyt/myspeed/releases/latest | grep browser_download_url | cut -d '"' -f 4) #(4)
+wget $(curl -s https://api.github.com/repos/gnmyt/myspeed/releases/latest \
+  | grep "browser_download_url.*linux-${ARCH}" | cut -d '"' -f 4) \
+  -O myspeed #(3)
 
-unzip MySpeed-*.zip && rm MySpeed-*.zip #(5)
+chmod +x myspeed #(4)
 
-npm install #(6)
-
-NODE_ENV=production node server #(7)
+./myspeed #(5)
 ```
 
 1. Here you install all necessary packages to install the project.
-2. This step installs the latest version of NodeJS.
-3. Now create the folder where you want to install MySpeed. In this case it is the folder `/opt/myspeed`.
-4. Now install the newest version of MySpeed.
-5. Now unzip the file you just downloaded (then you can delete it)
-6. Now install all dependencies.
-7. Now MySpeed is started. MySpeed is now available on port 5216.
+2. Now create the folder where you want to install MySpeed. In this case it is the folder `/opt/myspeed`.
+3. Download the pre-compiled binary for your architecture (x64 or arm64).
+4. Make the binary executable.
+5. Now MySpeed is started. MySpeed is now available on port 5216.
    If you plan to run MySpeed in the background, see the guide below.
 
 ## Install MySpeed from the source code
@@ -89,30 +91,31 @@ This process installs the latest development version of MySpeed. Errors may occu
 :::
 
 ```sh
-sudo apt-get install git curl -y #(1)
+sudo apt-get install git curl npm -y #(1)
 
-# You only need to run this if you don't have NodeJS installed yet
-curl -sSL https://deb.nodesource.com/setup_18.x | bash
-sudo apt-get install nodejs -y #(2)
+# Install Deno
+curl -fsSL https://deno.land/install.sh | sh
+export DENO_INSTALL="$HOME/.deno"
+export PATH="$DENO_INSTALL/bin:$PATH" #(2)
 
 mkdir /opt/myspeed && cd /opt/myspeed #(3)
 
 git clone https://github.com/gnmyt/myspeed.git . #(4)
 
-npm install #(5)
+deno install #(5)
 
 cd client && npm install && npm run build && cd .. && mv client/build . #(6)
 
-NODE_ENV=production node server #(7)
+deno run --allow-all server/index.js #(7)
 ```
 
-1. here you install all necessary packages to install the project.
-2. this step installs the latest version of NodeJS.
-3. now create the folder where you want to install MySpeed. In this case this is the folder `/opt/myspeed`.
-4. clone the MySpeed repository to get access to the code.
-5. now install all dependencies of the server.
-6. now compile the interface of MySpeed and move it to the folder where MySpeed can read it.
-7. now start MySpeed. MySpeed is now accessible on port 5216.
+1. Here you install all necessary packages to install the project.
+2. This step installs the Deno runtime.
+3. Now create the folder where you want to install MySpeed. In this case this is the folder `/opt/myspeed`.
+4. Clone the MySpeed repository to get access to the code.
+5. Now install all dependencies of the server.
+6. Now compile the interface of MySpeed and move it to the folder where MySpeed can read it.
+7. Now start MySpeed. MySpeed is now accessible on port 5216.
    If you plan to run MySpeed in the background, see the guide below.
 
 
@@ -136,11 +139,10 @@ Installing as a system service is not even that hard. In this case we use `syste
 
    [Service]
    Type=simple
-   ExecStart=/usr/bin/node server
+   ExecStart=/opt/myspeed/myspeed
    Restart=always
    # \/ It is strongly recommended to create your own user here
    User=root
-   Environment=NODE_ENV=production
    # \/ Specify your installation location here
    WorkingDirectory=/opt/myspeed 
 
@@ -154,7 +156,7 @@ Installing as a system service is not even that hard. In this case we use `syste
    ```sh [nano]
     Press `CTRL` + `X`, then press `Y` and press `Enter` to save the file and exit the editor.
     ```
-    
+
     ```sh [vim]
     Press `ESC`, then type `:wq` and press `Enter` to save the file and exit the editor.
     ```
diff --git a/docs/en/setup/windows.md b/docs/en/setup/windows.md
index 2869f213..44495bad 100644
--- a/docs/en/setup/windows.md
+++ b/docs/en/setup/windows.md
@@ -3,60 +3,53 @@ Here we describe the setup for Windows.
 
 ## Installing MySpeed
 
-1. Download NodeJS  
-   To use MySpeed, you first need **NodeJS**. You can easily download the installer [here](https://nodejs.org/en/download/). Recommended is the LTS version 18 of NodeJS.
+1. Download MySpeed  
+   Download the latest version of MySpeed from the [releases page](https://github.com/gnmyt/myspeed/releases/latest). Download the file `myspeed-windows-x64.exe`.
 
-2. Download MySpeed  
-   Now download the latest version of MySpeed. You can find the latest release [here](https://github.com/gnmyt/myspeed/releases/latest). Download the file "MySpeed-x.x.x-zip" from here.
+2. Place the file  
+   Move the downloaded file to a folder of your choice (e.g., `C:\MySpeed`). Rename it to `myspeed.exe` for convenience.
 
-3. Unpack the file  
-   Now unzip the downloaded file to a place of your choice. Preferably to a place that you know afterwards 🌚.
-
-4. Test your installation  
-   First navigate to the folder where you unzipped the file. Click with `Shift` + `Right click` into an empty area in this folder and select "Open in Powershell".  
-   Now paste this command into the console window and press `Enter`:
-   ```sh
-   npm install
-   ```
-   
-    ::: warning Does the NPM installation fail?
-    There is a possibility that there are no precompiled modules for your system. In this case you have to compile the modules yourself.
-    Follow these steps:
-
-    1. Download Python  
-       To "build" the project, you also need to download Python. You can do this [here](https://www.python.org/downloads/).
-
-    2. Download the Visual Studio BuildTools  
-       The "node-gyp" tool also requires Visual Studio's BuildTools to successfully "build" the project. Here's how it works:
-       1. click [on this link](https://visualstudio.microsoft.com/thank-you-downloading-visual-studio/?sku=BuildTools) and wait a short time until the download starts
-       2. open the file and click "continue
-       3. now select the optional workload "Desktop development with C++" and confirm your selection by clicking on "Install
-    3. run `npm install` again
-    :::
-   If everything runs successfully, you did everything right! Congratulations. :)   
-   You can now start MySpeed with this command in your Powershell.
-
-5. Start MySpeed
+3. Test your installation  
+   Open PowerShell or Command Prompt in the folder where you placed the file (Shift + Right-click > "Open PowerShell window here").  
+   Run the executable:
    ```powershell
-   $env:NODE_ENV="production"; node server
+   .\myspeed.exe
    ```
 
+   If everything runs successfully, you did everything right! Congratulations. :)   
+   MySpeed is now available on port 5216. Open http://localhost:5216 in your browser.
+
 ## Automatic startup using the autostart folder in Windows
 
 1. Open the autostart folder in windows  
    Press both keys (`Windows` + `R`) simultaneously on your keyboard until a Run dialog appears. Then type `%USERPROFILE%\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup` and press `Enter`.
 
-2. Create the autostart file  
-   First make sure you have [filename extensions active](https://support.microsoft.com/en-us/windows/common-file-name-extensions-in-windows-da4a4430-8e76-89c5-59f7-1cdbbc75cb01). Once this is done. Create a new document with `Right click` > `New` > `Text document`.  
-   Then press `CTRL` + `A` and write as filename "MySpeed.bat". Then press `Enter` 2 times
+2. Create a shortcut  
+   Right-click in the folder and select `New` > `Shortcut`. Browse to your `myspeed.exe` file and create the shortcut.
 
-3. Create the content  
-   Right click and select `Edit`. Then paste the code from below and adjust your installation location.
-   ```batch
-   @echo off
-   cd "C:\Users\Desktop\MySpeed"
-   set NODE_ENV=production
-   node server
+3. If everything worked, MySpeed should now start automatically when the system is started.
+
+## Alternative: Install from source code
+::: warning Attention
+This process installs the latest development version of MySpeed. Errors may occur.
+:::
+
+1. Download Deno  
+   To build MySpeed from source, you need **Deno**. Open PowerShell and run:
+   ```powershell
+   irm https://deno.land/install.ps1 | iex
    ```
 
-4. If everything worked, MySpeed should now start automatically when the system is started.
\ No newline at end of file
+2. Download MySpeed source  
+   Clone the repository or download the source code from [GitHub](https://github.com/gnmyt/myspeed).
+
+3. Install dependencies and build
+   ```powershell
+   deno install
+   cd client && npm install && npm run build && cd .. && move client\build build
+   ```
+
+4. Start MySpeed
+   ```powershell
+   deno run --allow-all server/index.js
+   ```
\ No newline at end of file
diff --git a/docs/en/troubleshooting.md b/docs/en/troubleshooting.md
index d1c3a365..15340877 100644
--- a/docs/en/troubleshooting.md
+++ b/docs/en/troubleshooting.md
@@ -8,16 +8,15 @@ There can be several solutions to this error. Just work through all possibilitie
 1. **Set the required permissions**  
    To set the permissions, enter the command `chmod 700 /opt/myspeed`. (Replace /opt/myspeed with your installation location).
 
-2. **Install the build essentials**  
-   It is currently possible that the error occurs because the `build-essential` package is not installed. Simply reinstall it with the command `sudo apt-get install build-essential`.
-
-3. **Perform a new installation of the modules**  
-   First, enter the command `rm -R node_modules` in the installation folder to delete the modules and then reinstall them with `npm install`.
+2. **Perform a new installation of the dependencies**  
+   First, run `deno cache --reload server/index.js` in the installation folder to refresh all dependencies.
    :::
 
 ::: danger This MySpeed instance is currently in development mode
-This is not really an error, just a backup to use the tool only in production environments.
-Set the environment variable `NODE_ENV` to the value `production`.  
-On Linux, you can do this with `export NODE_ENV=production` and on Windows in the PowerShell with `$env:NODE_ENV="production"`.  
+This means the client build folder was not found. If you installed from source, make sure to build the client first:
+```sh
+cd client && npm install && npm run build && cd .. && mv client/build .
+```
+Alternatively, download a pre-built release or use Docker.
 Also, read the [guide for 24/7 installation](setup/linux) if you plan to run MySpeed in the background and start it automatically at system startup.
 :::
\ No newline at end of file
diff --git a/scripts/install.sh b/scripts/install.sh
index 9773a917..e9ea3657 100755
--- a/scripts/install.sh
+++ b/scripts/install.sh
@@ -24,17 +24,29 @@ if [ $EUID -ne 0 ]; then
   exit
 fi
 
+ARCH=$(uname -m)
+case "$ARCH" in
+    x86_64)
+        BINARY_NAME="MySpeed-linux-x64"
+        ;;
+    aarch64|arm64)
+        BINARY_NAME="MySpeed-linux-arm64"
+        ;;
+    *)
+        echo -e "$RED✗ Unsupported architecture: $ARCH"
+        echo -e "$NORMAL MySpeed only supports x64 and arm64 architectures."
+        exit 1
+        ;;
+esac
+
 echo -e "$GREEN ---------$BLUE Automatic Installation$GREEN ---------"
 echo -e "$BLUE MySpeed$YELLOW is now being installed."
-if [ "$1" == "--beta" ]; then
-  echo -e "$YELLOW Version:$BLUE MySpeed$PURPLE Beta"
-else
-  echo -e "$YELLOW Version:$BLUE MySpeed Release"
-fi
+echo -e "$YELLOW Version:$BLUE MySpeed Release"
+echo -e "$YELLOW Architecture:$BLUE $ARCH ($BINARY_NAME)"
 echo -e "$YELLOW Location:$BLUE $INSTALLATION_PATH"
 echo -e "$GREEN Installation will start in 5 seconds..."
 echo -e "$GREEN ----------------------------------------------"
-sleep 10
+sleep 5
 clear
 
 if [ -d "$INSTALLATION_PATH" ]; then
@@ -50,13 +62,12 @@ if [ -d "$INSTALLATION_PATH" ]; then
     sleep 5
 fi
 
-if command -v systemctl &> /dev/null && systemctl --all --type service | grep -n "myspeed.service"; then
+if command -v systemctl &> /dev/null && systemctl --all --type service | grep -q "myspeed.service"; then
   clear
   echo -e "$YELLOWℹ MySpeed Service is being stopped..."
   systemctl stop myspeed
 fi
 
-
 clear
 echo -e ""
 echo -e "$BLUE-$NORMAL-$BLUE-$NORMAL-$BLUE-$NORMAL-$BLUE-$NORMAL-$BLUE-$NORMAL-$BLUE-$NORMAL-$BLUE-$NORMAL-$BLUE-$NORMAL-$BLUE-$NORMAL-"
@@ -70,7 +81,7 @@ apt-get update -y
 
 clear
 echo -e "$GREENℹ Info:$NORMAL Installation is now being prepared. This may take a moment..."
-sleep 5
+sleep 3
 
 function check() {
   clear
@@ -89,83 +100,40 @@ function check() {
 }
 
 check "wget"
-check "unzip"
 check "curl"
 
 clear
+
 echo -e "$BLUE🔎 STATUS MESSAGE"
-echo -e "$NORMAL Checking if node is present..."
-if ! command -v node &> /dev/null
-then
-    echo -e "$YELLOWℹ \"node\" is not installed.$NORMAL Installation will proceed..."
-    sleep 2
-    clear
-    echo -e "$PURPLEℹ Downloading...$NORMAL"
-    curl -sSL https://deb.nodesource.com/setup_20.x | bash
-    clear
-    echo -e "$PURPLEℹ Installing...$NORMAL"
-    apt-get install nodejs -y
+echo -e "$NORMAL Fetching latest release information..."
+RELEASE_URL=$(curl -s https://api.github.com/repos/gnmyt/myspeed/releases/latest | grep "browser_download_url.*$BINARY_NAME" | cut -d '"' -f 4)
+
+if [ -z "$RELEASE_URL" ]; then
+    echo -e "$RED✗ Could not find release for $BINARY_NAME"
+    exit 1
 fi
 
+echo -e "$GREEN✓ Found release:$NORMAL $RELEASE_URL"
+sleep 2
+
 clear
-
-if [ "$1" == "--beta" ]; then
-  RELEASE_URL=https://github.com/gnmyt/myspeed/archive/refs/heads/development.zip
-else
-  RELEASE_URL=$(curl -s https://api.github.com/repos/gnmyt/myspeed/releases/latest | grep browser_download_url | cut -d '"' -f 4)
-fi
-
-
 echo -e "$GREEN✓ Preparation completed:$NORMAL Installation of MySpeed will now commence..."
 sleep 3
 
 clear
-if [ ! -d "$INSTALLATION_PATH" ]
-then
-    clear
+if [ ! -d "$INSTALLATION_PATH" ]; then
     echo -e "$BLUEℹ Info: $NORMAL MySpeed will be installed under directory $INSTALLATION_PATH. Creating the folder now."
     sleep 2
-    mkdir "$INSTALLATION_PATH"
+    mkdir -p "$INSTALLATION_PATH"
 fi
 
 cd "$INSTALLATION_PATH"
 
 clear
-echo -e "$BLUEℹ Info: $NORMAL The current MySpeed instance is being downloaded. Please wait..."
+echo -e "$BLUEℹ Info: $NORMAL Downloading MySpeed binary. Please wait..."
 sleep 2
-wget "$RELEASE_URL"
-
-echo -e "$BLUEℹ Info: $NORMAL Download completed. Unpacking..."
-sleep 2
-if [ "$1" == "--beta" ]; then
-  unzip -qo development.zip
-  rm -R server client docs cli
-  mv myspeed-*/* .
-  rm development.zip
-  rm -R myspeed-development
-else
-  unzip -qo MySpeed*.zip
-  rm MySpeed-*.zip
-fi
-
-
-clear
-echo -e "$BLUEℹ Info: $NORMAL Necessary dependencies are being installed..."
-sleep 2
-rm -rf "$INSTALLATION_PATH/node_modules"
-npm install --force
-
-if [ "$1" == "--beta" ]; then
-  clear
-  echo -e "$BLUEℹ Info: $NORMAL Web interface is being compiled..."
-  sleep 2
-  cd client && npm install --
-
-force
-  cd .. && npm run build
-  cp -r client/build .
-  rm -rf client/build
-fi
+wget -O myspeed "$RELEASE_URL"
+chmod +x myspeed
 
 clear
 echo -e "$BLUE🔎 STATUS MESSAGE"
@@ -173,42 +141,42 @@ echo -e "$NORMAL Registering MySpeed as a background service..."
 echo -e ""
 echo -e ""
 sleep 2
-if command -v systemctl &> /dev/null && ! systemctl --all --type service | grep -n "myspeed.service"; then
-  cat << EOF >> /etc/systemd/system/myspeed.service
-  [Unit]
-  Description=MySpeed
-  After=network.target
 
-  [Service]
-  Type=simple
-  ExecStart=/usr/bin/node server
-  Restart=always
-  User=root
-  Environment=NODE_ENV=production
-  WorkingDirectory=$INSTALLATION_PATH
+if command -v systemctl &> /dev/null; then
+  cat << EOF > /etc/systemd/system/myspeed.service
+[Unit]
+Description=MySpeed
+After=network.target
 
-  [Install]
-  WantedBy=multi-user.target
+[Service]
+Type=simple
+ExecStart=$INSTALLATION_PATH/myspeed
+Restart=always
+User=root
+WorkingDirectory=$INSTALLATION_PATH
+
+[Install]
+WantedBy=multi-user.target
 EOF
   systemctl daemon-reload
-  echo -e "$NORMALℹ MySpeed will be added to autostart..."
-  sleep 1
-  systemctl enable myspeed
+
+  if ! systemctl is-enabled myspeed &> /dev/null; then
+    echo -e "$NORMALℹ MySpeed will be added to autostart..."
+    sleep 1
+    systemctl enable myspeed
+  fi
+
   echo -e "$NORMALℹ MySpeed service is starting..."
   sleep 1
-  systemctl start myspeed
+  systemctl restart myspeed
 fi
 
 clear
 
 if ! command -v systemctl &> /dev/null; then
     echo -e "$YELLOW⚠ Warning: $NORMAL Your Linux system currently does not support starting MySpeed in the background. \"systemd\" is required for this purpose."
-    echo -e "$BLUEℹ Info: $NORMAL If you have installed \"systemd\", you can restart the installation. It will be set up automatically."
+    echo -e "$BLUEℹ Info: $NORMAL You can start MySpeed manually by running: $INSTALLATION_PATH/myspeed"
     sleep 5
-else
-  echo -e "$GREENℹ MySpeed is being restarted..."
-  sleep 2
-  systemctl restart myspeed
 fi
 
 clear
@@ -216,6 +184,6 @@ echo -e "$GREEN-$NORMAL-$GREEN-$NORMAL-$GREEN-$NORMAL-$GREEN-$NORMAL-$GREEN-$NOR
 echo -e "$GREEN✓ Installation completed: $NORMAL MySpeed has been installed under $INSTALLATION_PATH."
 echo -e "You can access the web interface in your browser at$BLUE http://$(curl -s ifconfig.me):5216$NORMAL."
 if [ -d "$INSTALLATION_PATH" ]; then
-  echo -e "$BLUEℹ Info:$NORMAL If the update was not successful, please restart MySpeed:$BLUE systemctl restart myspeed"
+  echo -e "$BLUEℹ Info:$NORMAL To restart MySpeed:$BLUE systemctl restart myspeed"
 fi
 echo -e "$GREEN-$NORMAL-$GREEN-$NORMAL-$GREEN-$NORMAL-$GREEN-$NORMAL-$GREEN-$NORMAL-$GREEN-$NORMAL-$GREEN-$NORMAL-$GREEN-$NORMAL-$GREEN-$NORMAL-"
diff --git a/server/templates/env.html b/server/templates/env.html
index ba6cfae2..01c2d431 100644
--- a/server/templates/env.html
+++ b/server/templates/env.html
@@ -82,7 +82,7 @@
 
 <div class="explanation">
     <p>Your MySpeed instance is currently in development mode.</p>
-    <p>Please change the <code>NODE_ENV</code> variable to <code>PRODUCTION</code>,</p>
+    <p>Please build the client or use a production binary,</p>
     <p>if this is a production environment or go to the development</p>
     <p>environment.</p>
 </div>