CrayPrgEnv:
- add a new function __cmake_craype_linktype() that determines what
link mode the Cray compiler wrapper will use in a more sophisticated
way than just MATCHing for static/dynamic on the command line.
- add a new function __cmake_craype_setupenv() that does a
once-per-cmake-run setup that does the following:
1. does a basic check of the wrapper's configuration. Running
cmake and then changing module and/or linktype configuration
may cause build problems (since the data in the cmake cache
may no longer be correct after the change). We look for this
and warn the user about it.
2. uses the "module" provided PKG_CONFIG_PATH environment variable
to add additional prefixes to the system prefix path. This
function used to be done by CrayLinuxEnvironment using the
compiler implicit include/link paths but that is intended
only for cross-compiling on Cray front-end nodes. Since
CrayPrgEnv runs on both front-end and compute nodes, we
migrate this function here.
CrayLinuxEnvironment:
- No need to set variables like CMAKE_SHARED_LIBRARY_PREFIX to values
that have already been properly established by CMakeGenericSystem.cmake.
Remove redundant sets of CMAKE_SHARED_LIBRARY_PREFIX,
CMAKE_SHARED_LIBRARY_SUFFIX, CMAKE_STATIC_LIBRARY_PREFIX,
CMAKE_STATIC_LIBRARY_SUFFIX, CMAKE_FIND_LIBRARY_PREFIXES, and
CMAKE_DL_LIBS.
- No need to add $ENV{SYSROOT_DIR}/usr/include to CMAKE_SYSTEM_INCLUDE_PATH
when we already added $ENV{SYSROOT_DIR}/usr to CMAKE_SYSTEM_PREFIX_PATH.
- Remove __cray_list_intersect(), __list_clean_dupes(), and buggy
code that adds compiler implicit includes/libs to
CMAKE_SYSTEM_INCLUDE_PATH and CMAKE_SYSTEM_LIBRARY_PATH. This
function has migrated to CrayPrgEnv.cmake, as noted above.
See discussion in issue #17413 for additional details.
890bae524c Do not explicitly report "standard" include directories as implicit
5c171ca898 Restore unconditional use of "standard" include directories
9502276f82 Prefix implicit include directories with sysroot on construction
Acked-by: Kitware Robot <kwrobot@kitware.com>
Merge-request: !2981
MS-style command-line tools accept either `/` or `-` for command-line
options. Prefer `-` over `/` so that non-MS tools do not treat it as a
path.
Fixes: #18941
In commit 1293ed8507 (ParseImplicitIncludeInfo: keep implicit incl.
consistent when rerunning cmake, 2019-01-30, v3.14.0-rc1~26^2) we did
not account for `CMAKE_<LANG>_STANDARD_INCLUDE_DIRECTORIES`. This
variable lets platform modules or toolchain files specify directories
that are to be explicitly passed as standard include directories. These
include directories are used by the test project from which we extract
implicit include directories so they appear in the parsed results
whether or not the compiler really considers them implicit. Exclude
these entries from the computed implicit include directories since they
are not actually implied by the compiler when we invoke it with
"standard" include directories passed explicitly.
Instead teach the build system generators to treat the "standard"
directories as implicit for purposes of excluding them from appearing
earlier in the compiler command line due to `include_directories` and
`target_include_directories` calls.
Issue: #18936, #18944
Since commit 7cd65c97fa (Add CMAKE_SYSROOT variable to set --sysroot
when cross compiling., 2013-04-13, v3.0.0-rc1~342^2) we have prefixed
the value of `CMAKE_SYSROOT` to implicit include directories. This was
done because we hard-coded `/usr/include` as an implicit include
directory without accounting for the sysroot. Instead we should prefix
the hard-coded paths when they are constructed. Update the
`Platform/UnixPaths` module to do this as `Platform/Darwin` already
does.
Since commit 5990ecb741 (Compute implicit include directories from
compiler output, 2018-12-07, v3.14.0-rc1~108^2) the values of the
`CMAKE_<LANG>_IMPLICIT_INCLUDE_DIRECTORIES` variables are computed from
a real compiler invocation so they already account for the sysroot
prefix. In commit 6fc3382944 (Update logic for sysroot in detected
implicit include directories, 2019-02-13, v3.14.0-rc2~6^2) we attempted
to apply the prefix conditionally, but that is incorrect because the
compiler's real implicit include directories are not all under the
sysroot. Instead assume that all implicit include directories in
`CMAKE_<LANG>_IMPLICIT_INCLUDE_DIRECTORIES` already have the sysroot
prefix if needed. Code that constructs the value must be responsible
for that because it is the only place that knows.
The output is only merged for a step if it is logging to file. This
option is ignored for steps that are logging normally.
A minor grammatical error has also been fixed as part of this change.
The quoting added by commit 8c5221fb1f (try_compile: Preserve special
characters in COMPILE_DEFINITIONS, 2019-01-21, v3.14.0-rc1~108^2~3)
broke the case that the `COMPILE_DEFINITIONS` value contains a `;`.
Without the quoting the `;` would be generated literally in an unquoted
argument in the test `CMakeLists.txt` file and would then be expanded.
With quoting the `;` is preserved, which is not the old behavior.
Fix this by expanding the `;`-list ahead of time. Add test cases for
behavior with both `#` and `;`.
This was noticed with the PGI compiler where we set
`CMAKE_CXX*_STANDARD_COMPILE_OPTION` to values like `--c++17;-A`. The
symptom had also been observed while preparing commit ef8f237686
(ParseImplicitIncludeInfo: add SunPro Fortran and PGI compiler, Cray
fix, 2019-01-29, v3.14.0-rc1~26^2~2) but was not recognized at the time
as a regression. Revert the workaround added by that commit.
Fixes: #18919
d80ecba5c2 Fortran: Fix submodule file names across compilers
72057d9c15 Fortran: Thread compiler id through to internal Fortran parser
7ae329e2ed Fortran: Factor out .mod and .smod file name construction
Acked-by: Kitware Robot <kwrobot@kitware.com>
Acked-by: Michael Hirsch, Ph.D. <michael@scivision.co>
Merge-request: !2958
The naming convention for submodule files varies across compilers. Add
a table to the compiler information modules and thread the information
through to the Fortran module dependency parser. Fill out the table for
compiler ids known to support Fortran submodules.
Fixes: #18746
6fc3382944 Update logic for sysroot in detected implicit include directories
2ad14ef4ea cmAlgorithms: Add cmHasPrefix to match existing cmHasSuffix
557b2d6e65 Fix regression in -I/usr/include exclusion logic
017598a444 macOS: Fix addition of <sdk>/usr/include to default implicit include dirs
Acked-by: Kitware Robot <kwrobot@kitware.com>
Merge-request: !2957
The change in commit 15ad830062 (Refactor exclusion of -I/usr/include to
avoid per-language values, 2019-01-21, v3.14.0-rc1~108^2~4) caused the
exclusion to apply to Fortran, but it was only meant for C, CXX, and
CUDA. The purpose of the change was to prepare for the value of
`CMAKE_<LANG>_IMPLICIT_INCLUDE_DIRECTORIES` to be computed from the
actual compiler instead of hard-coded. We need to preserve exclusion of
`-I/usr/include` if the compiler has any implicit include directory that
looks intended to replace it, e.g. `<sdk>/usr/include` on macOS.
Fixes: #18914
In commit 1293ed8507 (ParseImplicitIncludeInfo: keep implicit incl.
consistent when rerunning cmake, 2019-01-30, v3.14.0-rc1~26^2) the
`Platform/UnixPaths` module was updated to add `/usr/include` to
`CMAKE_{C,CXX,CUDA}_IMPLICIT_INCLUDE_DIRECTORIES` through an
initialization variable used by `CMakeDetermineCompilerABI` instead of
directly. This approach makes it only a default that can be overridden
by detection of the implicit include directories really used by the
compiler.
The addition of `<sdk>/usr/include` to default implicit include
directories by the `Platform/Darwin` module needs the same update but
was accidentally left out of the original commit.
This change adds the Octave::Octinterp target to make the octinterp
library available without users having to resort to using the
Octave_INTERP_LIBRARY variable.
While all executables from a mingw toolchain share a common prefix,
only the ones provided with the compiler have a suffix, the binutils
do not.
Fixes: #18879
e8ee8cab97 Xcode: Completely disable code signing for compiler id detection
11da882a12 Apple: Introduce separate system name for iOS, tvOS, and watchOS
36cf44a7a3 Tests: Isolate RunCMake.XcodeProject per-device cases from host arch
Acked-by: Kitware Robot <kwrobot@kitware.com>
Merge-request: !2392
- Remove code signing requirements for non-macOS
- Do not set deployment target for non-macOS
- Build static library for compiler feature detection for non-macOS
- Use framework to run CompilerId tests for watchOS
- Port tests to new SDK handling
- Add new Apple cross-compiling section to toolchain documentation
Closes: #17870
a624a3e1b3 Ninja: Use deps=gcc for Intel Compiler on Windows
f4f3b6b9af Ninja: Detect when ninja is new enough to support a multi-line depfile
699cd03212 Ninja: Drop unnecessary deptype customization infrastructure
Acked-by: Kitware Robot <kwrobot@kitware.com>
Merge-request: !2893
be7b30f67e Find{BLAS,LAPACK}: Add note and example for using Intel MKL
b323407235 Find{BLAS,LAPACK}: Update docs to use modern conventions
ba30b94435 FindLAPACK: Remove extra indentation from a line
Acked-by: Kitware Robot <kwrobot@kitware.com>
Merge-request: !2880
